Novaflon spec protects and enhances porous surfaces such as fibre cement boards in internal and external environments. It is a solvent-based system and is designed primarily for spray application. The system provides ultimate UV resistance with great cleaning properties, good hardness, and a beautiful appearance. It is available in a vast range of colours and gloss or satin finish. Obviously, the suitability of the substrate in external conditions is an important consideration.
The Novaflon system provides ultimate UV resistance with great cleaning properties, good hardness and a beautiful appearance.
Surface Preparation
The substrate must be clean and dry.
Application
First Coat – two-pack of Polyurethane Undercoat to a minimum of 75 microns dry film thickness
Allow to fully cure – approx. 8 hours of drying time
Sand to a smooth, even surface.
Second Coat – apply Novaflon two-pack of Fluoropolymer dry film thickness of 50 microns.
Typical applications include fascia and facades, decorative columns and curtain wall panelling.
Novaflon is a unique two-pack fluoropolymer resin base topcoat that can cure at room temperature or under low bake conditions.
Novaflon gives excellent UV resistance and weathering performance and has very good application properties. This ‘State of the Art’ technology lowers the lifetime maintenance cost of coatings in a variety of environments.
Key Benefits
– Solvent-based system
– Designed for spray application
– Surface protector
Reviews
There are no reviews yet.